TILE ROOFING FOR FLORIDA HOMES

Concrete and clay tile can last 30–70 years depending on maintenance and underlayment quality. Some of the homes we reroof still have original tile from the 1990s or earlier.

⏳ We’ll help you choose a system that matches your long-term plans - whether you're staying for good or planning to sell.

Yes - like all roofing materials, tile can fade with prolonged UV exposure, especially in Florida’s sun. However, how much it fades depends on the material.

Concrete tile is coated with color on the surface, so it may show signs of fading or surface wear over the years. Some colors fade more noticeably than others - lighter and earth-toned tiles tend to age more gracefully.

Clay tile, on the other hand, has color baked throughout the tile body. It doesn’t rely on a surface coating, so fading is minimal and the color tends to deepen slightly with age rather than wash out.

🏡 We’ll show you real-life color samples, explain the expected fade rates by supplier, and help you choose a finish that holds up beautifully for decades.

Tile performs well when installed properly - but the fastening system and underlayment matter more than the tile itself. We use high-wind fastening patterns and code-compliant underlayment on every project, giving your roof its best shot at staying intact.

Tile itself is extremely durable - but the roof system as a whole still requires occasional maintenance to perform long-term. Most issues come from underlayment breakdown, cracked tiles, or clogged valleys.

We recommend:

• Annual roof inspections - especially before or after hurricane season

• Clearing debris from valleys, hips, and around skylights to prevent water buildup

• Replacing cracked or slipped tiles as needed

• Inspecting and maintaining flashings and sealants every few years

• Keeping gutters and downspouts clean to avoid overflow near tile edges

Staying ahead of small issues can extend the life of your roof by decades. We offer professional inspections and repairs to keep your tile system performing like it should.

If you have extra tiles from your original install, we can swap it out easily. If not, we’ll do our best to source a matching profile and color - or recommend the closest option available. This is why we always suggest saving leftover tiles after installation.

Concrete tile is more common, slightly more affordable, and extremely durable — but it’s also heavier and finished with a surface coating that can wear or fade over time.

Clay tile is naturally colorfast, with pigment baked through the entire tile rather than just coated on top. It has a smoother texture, resists fading, and is less porous than concrete. Clay is also lighter in weight and often chosen for its refined, handcrafted appearance.

🧱 We’ll walk you through both options with real samples, so you can see and feel the difference — not just hear about it.

Yes - but your roof needs to be evaluated first. Tile is heavier than shingles, so we’ll inspect your trusses, decking, and slope to make sure your structure can support the load. In many cases, it’s possible with reinforcement or upgraded engineering.

We don’t recommend it unless absolutely necessary. Tile can crack under pressure, especially if stepped on improperly. If you need roof access (for solar, satellite, etc.), give us a call - we can assist or advise safely.